Thinking of buying a Yacht in Greece?

Welcome. I have been Surveying boats since 1995. By 2021 I have completed over 3700 surveys, which includes 100's of types of sail and power boats. With many years of experience representing the interests of both Purchasers and Vendors, the problems which may arise in the process of purchasing a vessel are fully understood. 

Office: +30 2273022036.

WhatsApp: +44 7407705579.

Email: info@yachtsurveysgreece.com  steventruss1@aol.com 

Web: http://www.yachtsurveysgreece.com/

Blog: https://steve-insightmarinesurveyor.blogspot.com/

1998 Beneteau 50 Yacht for Survey in Preveza

Todays Inspection was this Pre-Purchase Survey and Valuation on this 1998 Beneteau 50 Cruiser.

Construction and What to Look For

The inboard mounted chain plates secure to tie rods down below to the hull. Beneteau mass produces these at their Marion, South Carolina factory and balances quality and cost. They use fiberglass liners to stiffen the hull. The hull is solid glass with a balsa cored deck. The hull-deck joint is the quality bulwark style. The mast is keel stepped enclosed below in a wood cover. The keel is external cast iron. For private owners, Beneteau made an owner’s version. This owner’s version has a single head and stateroom forward instead of the port starboard berths with forward heads. This layout is more attractive for cruising with a family – not to mention these version are non-chartered yachts.

History

Benjamin’s grandchildren Annette Beneteau Roux and Andre Beneteau started building fiberglass sailboats. In 1976, Andre Mauric designed 30-footer that kicks off their successful First series. These First series were great, quality offshore-able boats. In 1986, Beneteau opened a factory in Marion, South Carolina to build boats for the USA. Here, Beneteau started to focus more on quantity and the charter trade. In four years, they built 1,000 boats at the SC factory. In 14 years, they produced 3,500 yachts at the factory. One of the most success production-charter yachts they developed was the 50 Beneteau. This prolific Bruce Farr design has been the queen of Mooring’s charter fleet for over decade. Today, Madame Annette Beneteau Roux continues run Beneteau Yachts and focus on charter production.

Thinking of buying a boat in Greece? Need any Help? 

Checking your Cutlass bearings!

Seawater is the sole lubricant for your boat’s propeller shaft as it spins its way through life, turning thousands of rpm for hundreds upon hundreds of hours while you’re under way. The shaft is supported, typically, at its inboard end by the coupling that’s attached to the transmission; its other end is held in place by a fluted rubber tube referred to as a shaft or Cutless bearing. This bearing can be found, depending on the boat’s design, either within a shaft log that passes through the hull or in a strut some distance from the keel.

 

 

The Cutless bearing is usually made from a hard, rubberlike substance known as nitrile. Longitudinal flutes or valleys in the rubber tube are designed to improve water flow and to flush away any grit or other hard material that might wear on the shaft. The outer shell of the bearing may be made of either naval brass or a non-metallic composite, the latter for use with aluminium struts or stern tubes where corrosion could be a problem. Though durable, these bearings will wear out, and then they must be replaced to avoid annoying vibrations or, worse, shaft, log, or strut damage.

Found your dream Yacht in Greece? Drop me a message at steventruss1@aol.com I am back in Preveza mid November 2021. 

Todays assignment this Bertram 42 Pre-Purchase Marine Survey in Preveza Greece

Bertram has a well-deserved reputation for building rugged, high quality boats. Bertram has an interesting history, for it was one of the three first production boat companies to start up in 1961 along with Hatteras and the Henry Hinckley Company, all known for producing top quality boats that have survived to this day.  Well, almost, for the current status of Bertram seems to be that it is teetering on the edge of extinction.

 Model- Detroits 671T1 (2 stroke diesel)
Year of Manufacture- 1980
No. of Engines- 2
HP (Each)- 425 HP each!

Quality fiberglass fuel tanks. Bullet proof!  

The reputation of Bertram is built on rough and rugged sport fishermen based on the original Ray Hunt design that produced boats that keep on going when others had to put into port.

Thinking of buying a Yacht or Motor Cruiser in Greece. Need any help? Drop message.


 

Yacht Survey on this Jeanneau Sun Odyssey 50 DS in Preveza Greece

Todays Inspection was on this Jeanneau Sun Odyssey 50 DS. This was the owner's version layout and boasted an impressive aft owner's cabin with a spacious en-suite plus two large double forward cabins. This was a great example of the popular 50 DS with the most sought after layout. 

Its construction is sound, and it’s an easy-to-sail vessel with an electrically assisted sailplan, a lot of entertainment space, and a cleverly designed convertible interior. 

She was equipped with an optional 110-horsepower diesel that could drive it to hull speed with a bit of throttle to spare. 

Copper coat epoxy antifouling should last for years!

Check out the engine test. - Mastervolt heavy duty alternator 130A* (additional)

3 Blade 20" Flexofold self folding.

                 Thinking about buying a Yacht in Greece? Drop me a message.