Thinking about buying or insuring a boat in Preveza Greece??

Thursday, 22 December 2011

Steel Dutch De Ruiter Motorsailer

I was lucky enough to Survey this Steel Dutch De Ruiter Motorsailer today at Brooms Marine Services. Built Circa 1981, powered by a Ford Lehman 120hp diesel engine with 6 berths. A quality blue water yacht!!









Surveyors comments generally Surveying steel vessels:
Most plate and frame material I inspect on steel yachts is low carbon mild steel and occasionally I will see core-ten steel. The welding techniques differ as mild steel cannot be welded hot and fast and core-ten cannot be continually welded as it can distort. So you will see more starts and stops and this type is much more difficult to weld. I use a welder’s chipping hammer often in my inspections to explore corrosion. Don’t be surprised if you happen to go through on older vessel, and be sure to have written permission from owners before and after to prevent some costly embarrassment. A metal hull inspector needs to know where to look and what to look for. You need to know how to identify three basic problems: deterioration, defects and damage. Deterioration is the largest single defect you will have to identify. This inherent problem is due more often than not to age. The older the vessel is, the more likely you are going to see this type of deterioration, be it rust or pitting. The next largest problem is lack of proper maintenance. The largest inherent problem with steel yacht construction, be they auxiliary sail or power, is the fact that most are not constructed with maintenance in mind. Cabin soles, ceilings, and insulation cover so much of a vessel’s structure and totally restrict internal inspections in many areas. Many steel yachts have integrated tanks--water, fuel or waste--and most do not have inspection plates to allow entry and most of your inspections will not involve entry. Hull defects are often easier to identify because they may be more readily evident. Plate deformation is reflective in nature. If you have plating deformation, you should suspect and look for reflective internal framing defects. Severe point loading from impact or hard grounding can cause cracking or tearing of the plate, frames or welds. A strong light and a keen eye are your best weapons here.



Wednesday, 21 December 2011

Broom 10/70


10/70 plan

I Surveyed this 10/70 today at Brundall. The successor to the Broom European and similarly intended for the continental market, the 10/70 has a solid keel which keeps it in a straight line even at a crawling pace, making it ideal for the inland waterways.

Inside the layout is similar to the European, with the galley forward to starboard. The sliding doors from the saloon to the side decks have been deleted allowing for a U-shaped sofa. In the master cabin the twin berths were replaced by a centreline double.

Most boats were fitted with twin Volvo's, ranging from 105HP to 220HP, although a typical configuration is this exmaple with twin Volvo TMD41A (150HP each). Offshore, boat trim was improved by fixed or adjustable trim tabs.









Thinking of Buying a Boat and Need Help? I specialise in Broads Boats of all types and I will assist you to make an informed decision. Contact me for a detailed and comprehensive report at: steventruss1@aol.com


Tuesday, 20 December 2011

Cruiser Class Yacht

I Surveyed this little Yacht today at Anne Whelptons Yard at Upton Dyke. Built by Arthur Powley who use to work out of the back of the New Inn in Horning back in the 1920s.

She is of timber construction, accommodates two berths in one cabin. She has a raked stem, counter stern and a fixed ballasted keel. She has a typical Broads type gaff rig, and is steered from an aft cockpit well.






Surveyors comments: Concealed areas within a hull are always a problem but, most wood vessels are constructed in such a way that enough access is available to make a fair assessment. It is usually possible to pull up floors (such as screwed in place plywood panels and the like) and remove enough panelling that one can get a fairly good glimpse of the bottom and lower sides. Carrying an electric screw gun is a must in order to do this quickly and effectively.

Yacht surveyors do carpeting and beds!! That means one has to move a lot of mattresses, bedding, carpets and emptying out of lockers, etc. Once the interior is opened up as best possible, Im ready to begin....

Thinking of Buying a Boat and Need Help? I specialise in Broads Boats of all types and I will assist you to make an informed decision. Contact me for a detailed and comprehensive report at: steventruss1@aol.com

Thursday, 15 December 2011

Ocean 30

I surveyed this Ocean 30 Motor Cruiser at Horning today…. These are very popular boats on the Norfolk Broads. All Ocean 30 and Moonraker 30’s were moulded by Aquafibre. The Ocean 30 was built and marketed by Aquafibre hence the Broom connection. The Broom 30 hull is identical to the Ocean 30.
Apart from the earliest Ocean 30's which had Timber tops their were at least 3 Mks a four berth, a five berth with an aft quarter cabin like this example, and a final version where the head was moved forward between the front lower cabin and the Saloon. Regarding the Ocean 30 with a complete aft cabin, I think there were only ever 2 made (someone may know different) - these were both for Porter and Haylett.


 





Surveyors comments generally:

These old cruisers were in production from 1966 to 1979... and its well documented that they suffer from Osmosis blistering to the underbody. If there are no blisters I would definitely do nothing even if a moisture meter shows very high readings. If there are blisters but they are small and not too many they are not likely to have any significant effect on the structural strength. "Thousands of boats are cruising happily throughout the Norfolk Broads with high moisture readings and an underwater hull resembling bubble wrap. Just keep an eye on the situation. ..."

Saturday, 10 December 2011

Broom Ocean 42

I Surveyed this Classic Brooms Motor Yacht today. The Broom Ocean 42 is a very popular model and this example is well designed for extended family cruising, with a spacious layout and 6 berths. This craft is at home both at sea and cruising the inland waterways.Interior layout varies in detail depending on what was specified when new. All boats have a large aft cabin and two forward cabins although in some later models the forward V-berth was replaced by an island double, allowing guests to be accommodated in some comfort.

Some boats do not have the interior helm position, preferring instead to make the most of the large deck saloon. In most cases a 'corridor' galley, reminiscent of the Ocean 37, leads to the en-suite owners aft cabin, although some models like this example had a separate staircase to port.

A variety of twin Volvo diesels were fitted during the production life, varying in power from between 200 and 300hp, which had a corresponding impact on performance. This one has the TAMD 60C Volvos with 250HP and a max speed of about 20 Knots.







Surveyors comments generally about older boats:

Older Brooms boats suffer from window leaks! These leaks usually develop because the seal between the window frame and the fiberglass part of the boat has broken. The break in the seal can be so small that you can't even see it. This is because of the capillary effect, which draws water into the smallest of cracks and more or less acts as a water pump to keep bringing water in. Its also why water can enter at one point and be coming out somewhere else, perhaps two feet away from the source of the leak.

To stop windows leaking you may have use a non-hardening caulking so that the caulking can move with the expansion. To deal with this problem, you may have to remove the frames, rebed them and refasten them less tightly than they were previously installed.