I went to Broom Boats yesterday to inspect this 1970’s Classic for Pre-purchase. The 35 European is one of the earlier models to utilise the, now classic, Broom layout of forward guest cabin, midships saloon, aft owners' cabin with en-suite toilet and shower, and the helm on the aft deck. The galley, partly open to the saloon, and a second toilet are between the forward cabin and saloon.
All boats have an internal helm on the port side of the saloon and can sleep from five to seven people, depending on layout variations and the size of the people, with two or three single berths in the forward cabin, two singles in the aft cabin and a single or double on the convertible settee in the saloon. In addition to the door onto the aft deck, the saloon has sliding doors on both sides giving access to the side decks.
Most earlier boats were fitted with the side mounted twin Perkins H6.354 diesels like this example I looked at today of either 115hp or 145hp, the latter being turbo-charged, whilst some had 120hp Ford Mercrafts. Most later boats, from 1978(?), were fitted with twin 140hp Volvos which, because they were taller, required the saloon floor to be raised several inches with a consequent change to the saloon roof, which is noticeably more 'cambered' on these later 'Mark 2' boats.
Build Period: 1973 - 1983
Number Built: 157
Successor Model: Broom 10/70
Average Market Value: £45,000
Surveyors comments: This owner will be taking the boat back to West Mersea in Essex if the sale goes ahead: Here are some basic checks to follow before voyaging.
Before starting the engine:
Open up the boat and ventilate all spaces, especially the bilges and engine compartment. Check for fumes and inspect for water, oil and fuel leakages. Check oil levels in the engine and where appropriate the gearbox. Switch on the main power isolator. Check the coolant level in the heat exchanger if fitted. Ensure that air ducts are free from obstruction. Carry out a visual inspection of the engine paying particular attention to the condition of: belt drives, electrical connections, water hoses, fuel filters and the exhaust system. Check the bilge-pump system and particularly that the suctions are clear. Check for debris which find its way into the bilges and block the pump. Have a manual pump as a back-up. Open the relevant seacocks/cooling water inlet valves. Check fire extinguishers are in place and in good working order.
General:
Make a visual check to ensure that there is sufficient fuel for the intended voyage allowing extra for contingencies. Keep your engine handbook, tool kit and and necessary spare parts on the boat. If in any doubt about the reliability of your machinery have it checked by an expert and ensure it is serviced regularly. Ensure that the battery and connections are as waterproof and secure as possible.
Running Checks:
Allow the engine to warm up slowly. Never apply full throttle to a cold engine! Check that the cooling water is circulating - Look over the side to make sure it's discharging. Check the oil pressure, engine temperature regularly and that the battery is charging. Check the stern gland and all seacock hose connections for leaks. Check the engine visually for signs of fuel leaks, overheating and excessive vibration. Before stopping the engine allow it to idle a few minutes to cool down.
On Your Return:
Inboard Engines - Check the engine and ancillary machinery for any problems or damage - Remember to fix it before your next trip! Close seacocks/cooling water inlet valves and switch off the main power isolator when boat is left unattended.
Thinking of Buying a Boat and Need Help? Call Insight Marine Surveys Ltd. I specialise in Boats of all types, and I will assist you to make an informed decision. Contact me for a detailed and comprehensive report at: steventruss1@aol.com
All boats have an internal helm on the port side of the saloon and can sleep from five to seven people, depending on layout variations and the size of the people, with two or three single berths in the forward cabin, two singles in the aft cabin and a single or double on the convertible settee in the saloon. In addition to the door onto the aft deck, the saloon has sliding doors on both sides giving access to the side decks.
Most earlier boats were fitted with the side mounted twin Perkins H6.354 diesels like this example I looked at today of either 115hp or 145hp, the latter being turbo-charged, whilst some had 120hp Ford Mercrafts. Most later boats, from 1978(?), were fitted with twin 140hp Volvos which, because they were taller, required the saloon floor to be raised several inches with a consequent change to the saloon roof, which is noticeably more 'cambered' on these later 'Mark 2' boats.
Build Period: 1973 - 1983
Number Built: 157
Successor Model: Broom 10/70
Average Market Value: £45,000
Surveyors comments: This owner will be taking the boat back to West Mersea in Essex if the sale goes ahead: Here are some basic checks to follow before voyaging.
Before starting the engine:
Open up the boat and ventilate all spaces, especially the bilges and engine compartment. Check for fumes and inspect for water, oil and fuel leakages. Check oil levels in the engine and where appropriate the gearbox. Switch on the main power isolator. Check the coolant level in the heat exchanger if fitted. Ensure that air ducts are free from obstruction. Carry out a visual inspection of the engine paying particular attention to the condition of: belt drives, electrical connections, water hoses, fuel filters and the exhaust system. Check the bilge-pump system and particularly that the suctions are clear. Check for debris which find its way into the bilges and block the pump. Have a manual pump as a back-up. Open the relevant seacocks/cooling water inlet valves. Check fire extinguishers are in place and in good working order.
General:
Make a visual check to ensure that there is sufficient fuel for the intended voyage allowing extra for contingencies. Keep your engine handbook, tool kit and and necessary spare parts on the boat. If in any doubt about the reliability of your machinery have it checked by an expert and ensure it is serviced regularly. Ensure that the battery and connections are as waterproof and secure as possible.
Running Checks:
Allow the engine to warm up slowly. Never apply full throttle to a cold engine! Check that the cooling water is circulating - Look over the side to make sure it's discharging. Check the oil pressure, engine temperature regularly and that the battery is charging. Check the stern gland and all seacock hose connections for leaks. Check the engine visually for signs of fuel leaks, overheating and excessive vibration. Before stopping the engine allow it to idle a few minutes to cool down.
On Your Return:
Inboard Engines - Check the engine and ancillary machinery for any problems or damage - Remember to fix it before your next trip! Close seacocks/cooling water inlet valves and switch off the main power isolator when boat is left unattended.
Thinking of Buying a Boat and Need Help? Call Insight Marine Surveys Ltd. I specialise in Boats of all types, and I will assist you to make an informed decision. Contact me for a detailed and comprehensive report at: steventruss1@aol.com
