I had a return visit to Broom Boats in Brundall today to Survey this Broom 30 … a 1970’s model. Sharing the same round-bilged GRP hull as the Ocean 30, designed by Mr R.M. "Rip" Martins who was a naval architect, the Broom 30 is distinguished by its midships wheelhouse saloon, with sliding doors on both sides. The superstructure and interior were designed by Mr Martin Broom and four pre-1968 boats had a mahogany superstructure and teak-laid deck, after which time the construction was all GRP. Wooden uprights in the forward windscreen and wooden wheelhouse door frames were also phased out in later models.
Most people are surprised by the spaciousness of the interior, which provides four single berths in two cabins, a wheelhouse/saloon with a convertible settee and sunroof, two bathrooms and a 'corridor' galley. Some boats like this example have had a helm position retro-fitted to the aft cabin roof, behind the wheelhouse/saloon, increasing air draught to 9ft.
Engines are mostly Perkins 4-cylinder diesels ranging from 35 to 70hp in either single or twin configurations. This had the larger 4.236 70HP option on a single shaft. The difference in top speeds between these is only about 1 knot.
Most people are surprised by the spaciousness of the interior, which provides four single berths in two cabins, a wheelhouse/saloon with a convertible settee and sunroof, two bathrooms and a 'corridor' galley. Some boats like this example have had a helm position retro-fitted to the aft cabin roof, behind the wheelhouse/saloon, increasing air draught to 9ft.
Engines are mostly Perkins 4-cylinder diesels ranging from 35 to 70hp in either single or twin configurations. This had the larger 4.236 70HP option on a single shaft. The difference in top speeds between these is only about 1 knot.
No comments:
Post a Comment
Hi, how can I help?