Thinking about buying or insuring a boat in Preveza Greece??

Thursday 5 February 2015

Powles 38 TSMY

I was carrying out an Insurance Survey at Brundall Bay Marina this morning on this Powles 38 TCMY. The 33 & 36 were designed by Bernard Olesinski, the 41 was John Bennett. Im not sure who designed the 38. Maybe someone reading this BLOG can help. This I guess was one of the original 38’s of which most were aft cabin which later developed into the aft cockpit Super 38. I think one of the boat mags ran an article on Powles and included details of most models. I think they ranged from the 33 upto 53.



2 x Ford Mermaid diesel engines on shafts. (185HP).


I once heard that the 37 which was based upon the Broom/Ocean 37 Hull was not the boat it was intended to be. Apparently the Ocean 37 was meant to be a Powles but the management felt it too avant-gardes so was further developed by Aquafibre and marketed by Broom. The more conventional but nice Powles 37 was then born.


Surveyors comments: The hulls on these 'old girls' are very thick, so expect to see some osmosis blistering below the waterline. (its normal!). In most instances of osmosis, the structural laminate will be barely moist, and any reduction in mechanical strength will be negligible.


Thinking of Buying a Boat on the Norfolk Broads and Need Help? I specialise in Boats of all types, and I will assist you to make an informed decision. Contact me for a detailed and comprehensive report at:  steventruss1@aol.com. 




Monday 2 February 2015

Moonraker 36





I was back at Brooms this morning to Survey this Moonraker 36 Fast Cruiser for Insurance. The Moonraker 36 was one of the most popular medium sized fast cruisers of the 1970s. The boat was launched in 1970 by Moonraker Marine of Brundall, Norfolk, where later became JCL Marine, and nearly 400 boats were built before JCL went into liquidation in 1980.

The reason for the boats popularity were its competitive price (the early examples cost under £10,000 with the smallest engine option of twin 100hp GM diesels) and good accommodation, with a total of six berths. Most were fitted with Perkins 145HP giving a top speed of 18 to 20 knots. This one had the Ford 180HP turbo diesels.

Moonraker 36 History:

When the Moonraker 36 was introduced in January 70, orders in hand were completed, but no further orders were taken. All in all 52 Moonrakers on the Ocean 30 hull were produced.

The Moonraker 36 Softrider was introduced as the market demanded it, requiring a bigger boat and Royal Navy Architect Robert Tucker was the original designer of the hull. Bell Buxton Boat Builders was then formed to produce the Moonraker 36 under the name Moonraker Marine. Bell Buxton produced all in all 122 vessels.

On July 12th.1971 the yard was taken over by Anthony Colin Bruce (known for his Lotus Sports cars), under the name Moonraker International. Chapmans arrival in boat manufacturing was no accident. For months he had been considering designs of a new boat in the 30-45-ft. range.

He redesigned the superstructure and thereby gave the boat the elegant look, which today more than 40 years later, still makes the boat impressive. From 1973 Moonraker was produced under the name JCL marine/Moonraker Motor Yachts, and with minor adjustments the manufacturing continued until October 1980, where the builders folded, a victim of the recession that gripped the industry at the time
.

Found this on Google!!
In 1987 the manufacturing was taken up again by Aqua Bell / East Anglian Marine in Brundall, Norwich. The boats were then called Moonraker Super 36, and traded through Monitor Marine / D.C.Developments. The last boat was built in 1991 to the manager of Aqua Bell, Vic Bell. (Where my office is situated). In the period as a hole, just fewer than 400 Moonrakers were built, the first 300 of which were built before end of 1974. Moonrakers were sold to more than 30 countries including Bahrain and the USA.

The Sedan and the Cruiser were powered by twin Perkins 6.354 115hp six-cylinder diesels, the Sports Yacht by turbocharged T6.354s developing 175hp. The 175s were also available on the Sedan and the Cruiser in a higher-spec version called the Express ­ most buyers opted for the extra power.



Surveyors comments

Some of the hulls were renowned to have some osmosis blistering, although many have now been peeled and treated with epoxy. Fuel and water tanks are constructed from fibreglass and are bonded deep into the hull. Fuel filler and vent pipes are an unusual design ( more like seen in the automotive industry!) and many had to be changed to pass the current Boat Safety Scheme Regulations.

Thursday 29 January 2015


Volunteering is a fantastic way to get involved with the work of the Broads Authority.


Many volunteers see it as a really satisfying way of giving time, skills and energy back to a place they treasure, thereby helping to keep it special for others now and in the future.

Volunteers are invaluable to us and we welcome interest from anyone who is over 18 with a love of the Broads who wants to help look after this part of the national park family.

Opportunities arise in all areas of work from administration to ranger duties. By getting involved you'll meet new people, learn new skills, discover hidden parts of the Broads and make a difference.

So whether you want to learn new skills, take a step towards paid employment or just have fun, take a look at our current volunteering opportunities.

The Broads Authority also offers opportunities for team-building challenges for corporate groups through our corporate volunteering scheme.

You may also like to view the Volunteer Action Plan Update 2013

Wednesday 28 January 2015

Bourne 35 Broads Cruiser

I was back at Norfolk Yacht Agency today in Horning Surveying this Bourne 35 for a pre-purchase. She was designed by R.M. 'Rip' Martins in the early 1960's and built by a Nottingham firm called Bourne Plastics.








Aquafibre also moulded the 35ft hull, originally designed by Rip Martins which became the basis of the Aquafibre 35, and a number of old Bourne 35s have been renovated by replacing the wooden superstructure with a modern Aquafibre 35 design.

Surveyors comments: I have Surveyed dozens of this ‘marc’ over the years. They are very popular for owners wanting that classic Broads Boat look. Check the hull (underbody) for any serious osmotic defects. This one had alreday been been treated. The hulls are thick so there’s never normally a structural issue, but big blisters could de-value the boat and make her difficult to sell. Apart from the wooden superstructure on some models, they normally survey very well. An attractive Classic Broads Cruiser which hold their value.

Thinking of Buying a Boat and Need Help? I specialise in Boats of all types, and I will assist you to make an informed decision. Contact me for a detailed and comprehensive report at: steventruss1@aol.com