Thinking about buying or insuring a boat in Preveza Greece??

Thursday, 22 September 2011

Broom 10/70 Motor Yacht

Todays job was at Brooms Boats in Brundall Surveying this Broom 10/70. This is the second time I have inspected this boat, the last time was over four years ago....









The successor to the Broom European and similarly intended for the continental market, the 10/70 had a solid keel which kept it in a straight line even at a crawling pace, making it ideal for the inland waterways.

Inside the layout is similar to the European, with the galley forward to starboard. The sliding doors from the saloon to the side decks have been deleted allowing for a U-shaped sofa. In the master cabin the twin berths were replaced by a centreline double.

Most boats were fitted with twin Volvo's, ranging from 105HP to 220HP, although a typical configuration was twin Volvo TMD41A (150HP each). Offshore, boat trim was improved by fixed or adjustable trim tabs.
10/70 plan

Surveyors comments:

I find the 10/70 to be everything Ive come to expect from a Broom. Well built, well thought out, and an excellent finish, and attractive in a restrained way. Designed for trouble free boating, it does not allow its sensible approach to be compromised by the whims of fashion. It is not the fastest 35 you can buy, nor does it ram in a greater number of berths, but you will be hard put to fault it, and its low air draught means that you will be able to visit the parts that other boats cannot reach…

Hampton Safari Mk II

Today’s assignment was at Anne Whelptons Yard at Upton Dyke near Acle, Norfolk, carrying out a Pre-purchase Survey on this little Hampton Safari River Cruiser.

In the 1960's, Alec Hampton's boat hire business 'Hampton Boats' at Oulton Broad consisted of a fleet of traditional mahogany cruisers. Alec then designed the mark one Hampton Safari for production in fibreglass. The length was increased from 22' 6" to 25'6" and the beam from 8' 6" to 9' 6". A plug was made from marine plywood, which was then used to form the female hull moulding. The boats were moulded firstly by Rydgeway Marine of Kessingland, and then by Bob Smith of Lowestoft.


Although a total of 256 Hampton Safaris were produced from 1969 to 1982, most were supplied to other hire-boat yards as bare mouldings for their staff to complete. During the peak years, Hampton Boats ran 14 Safari 25's in it's fleet, but this reduced to just two in the final season of 2002. Sadly, the yard has now ceased trading, and will surely be missed by the large regular clientele, some of which have been regulars for nearly 30 years.(Hamptons themselves only built one Safari for private use, in 1971 called 'Blue Tit' for John Jarrold, who was then the Mayor of Norwich.)

 


This is the Mark II version with sliding wheelhouse/lounge. They are somewhat difficult to distinguish because individual boatyards completed the Hampton mouldings to their own spec. Mark 1's (usually) didn't have the integral molding for the gas bottle stowage under the afterdeck, or the moulded in mudweight holder on the foredeck. The control panel moulding was different and the keel was smaller






Surveyors comments:

Check for window leaks on older models. To stop windows leaking you may have use a non-hardening caulking so that the caulking can move with the expansion. To deal with this problem, you may have to remove the frames, rebed them and refasten them less tightly than they were previously installed.

Some osmosis blistering will be common... but not usually structural. Its good practice to take the vessel out of the water over the winter period and store her in the dry, out of thus reduce the possibility of further osmotically induced gel coat blistering.

On older models, check all floor bearers and lower bulkheads for timber deterioration.......

Thinking of Buying a Boat and Need Help? I will assist you to make an informed decision. Contact me for a detailed and comprehensive report at: steventruss1@aol.com

Wednesday, 21 September 2011

Sealine S28

Had a trip out to Brundall today on the South Broads. The Sealine S28 is another example of Sealine's wonderful use of space relative to the overall length. This model manages a very large cockpit and interior with all the luxuries normally associated with much bigger boatsThe accommodation on the S28 is second to none for its class. She offers a large galley area incorporating a fridge freezer and full washing up facilities! The forward area of the saloon features a large u shaped seating area that in the evenings creates a large double berth. The aft cabin again features a large double berth. Located between the two sleeping areas is the toilet and shower area. This features a full toilet and hot and cold shower…..

 







Surveyors comment:

After Inspecting dozens of these boats over the years they tend to go through Survey very well. This model was a 1998, this was the year when the RCD was brought in, so its important to check all the boats paperwork with the Yacht Broker prior to purchase.

What is the RCD


The Recreational Craft Directive (RCD) is a trade directive that became law on the 16th June 1996. A two-year introductory period was allowed for and therefore new craft placed on the market after the 16th June 1998 have to comply with the mandatory requirements of the Directive.

NEED HELP! MY CONSULTATION & INSPECTION PACKAGE OFFERED

· To inspect the craft for Essential Safety Requirements (ESR's) and Boat Safety Scheme standards.
· Issue Boat Safety Certificate.
· Supply Declaration (Certificate) of Conformity.
· Advise on Hull Identification Number (HIN) compilation and location.
· HIN registration with RYA or BMF where applicable.
· CE plate supplied and advised marking.
· Consultation and conformity assessment during fitout.
· Compilation of Boat Manual (excluding technical drawings & diagrams).
· Compilation of Technical Construction File (TCF)


Tuesday, 20 September 2011

Autumn Passage Regatta

Had another fantastic Regatta at Hickling Broad with lots of old friends and lots of old boats...


Charlie and Churchie


Chic... lovely Edwardian Half Decker

Me at the Helm!

Perfect evening.....





Getting ready for the 2 hour race down to Potter...

Ross in one of his many hats!

On our way back....




Monday, 19 September 2011

Sealine 290 Ambassador

Todays assignment was carrying out a Full Survey and Valuation on this Sports Crusier...Sealine is a Midlands based company, which has been designing and building boats for over 30 years. The range includes craft up to 60ft, but it is the smaller craft which are increasingly popular on the Broads


Accommodation: Sleeps four in one double berth and two single berths,
 layout comprising of a forward drop down double, two single berths in the aft cabin


2 x Volvo diesels AD31B @ 130hp.



Surveyors comments: A good inspection of the sterndrives is important: Check drive lift motors, bellows, props, oils, bearings, seals, sacrificial anodes etc. I recommend that all sacrificial anodes are checked regularly, failure to do so may cause serious corrosion problems.